Products
VBOX CAN Bus Speed Interface (CSI-V2)
RLCSI-V2
●Obtain engine speed and road speed from almost any vehicle with a CAN bus
●Speed pulse signals directly from the vehicle CAN bus
●Optional cable for use with a vehicle's OBD socket
●Automatic detection of vehicle make – no configuration needed
Overview
The CAN Bus Speed Interface (RLCSI-V2) is a convenient way to obtain engine speed and road speed from almost any vehicle with a CAN bus.
No configuration is needed: the interface determines the vehicle make it is fitted to and automatically extracts the speed information from the CAN bus. Please check the Racelogic Vehicle CAN Database for supported vehicle models.
An optional cable is available for vehicles that carry the relevant CAN information on their OBD diagnostic port.
Please note
On some vehicle makes, CAN bus information is available on the OBD-II connector, but this is not the case on all CAN bus equipped vehicles. Where it is not, it may be necessary to tap directly into the vehicle wiring loom. Please check the Racelogic Vehicle CAN Database for advice on CAN bus location for specific vehicles.
Technical Specifications
Vehicle Speed Output
●Signal: approx. 3600 pulses/mile
●Amplitude: voltage applied to Pin 9 (+5 V option available on RLCSI-V3)
Engine Speed Output
●Signal: 2 pulses per revolution
●Amplitude: voltage applied to Pin 9 (+5 V option available on RLCSI-V3)
Environmental
●Operating temperature: 0 to +60°C
●Storage temperature: -20 to +70°C
●Supply voltage: +6 to +16 V DC
Physical
●Dimensions (L x W x H): 101 x 50 x 25 mm excluding cables
●Weight: 142 g excluding cables, 400 g including cables
The CAN Bus Speed Interface (RLCSI-V2) is a convenient way to obtain engine speed and road speed from almost any vehicle with a CAN bus.
No configuration is needed: the interface determines the vehicle make it is fitted to and automatically extracts the speed information from the CAN bus. Please check the Racelogic Vehicle CAN Database for supported vehicle models.
An optional cable is available for vehicles that carry the relevant CAN information on their OBD diagnostic port.
Please note
On some vehicle makes, CAN bus information is available on the OBD-II connector, but this is not the case on all CAN bus equipped vehicles. Where it is not, it may be necessary to tap directly into the vehicle wiring loom. Please check the Racelogic Vehicle CAN Database for advice on CAN bus location for specific vehicles.
Technical Specifications
Vehicle Speed Output
●Signal: approx. 3600 pulses/mile
●Amplitude: voltage applied to Pin 9 (+5 V option available on RLCSI-V3)
Engine Speed Output
●Signal: 2 pulses per revolution
●Amplitude: voltage applied to Pin 9 (+5 V option available on RLCSI-V3)
Environmental
●Operating temperature: 0 to +60°C
●Storage temperature: -20 to +70°C
●Supply voltage: +6 to +16 V DC
Physical
●Dimensions (L x W x H): 101 x 50 x 25 mm excluding cables
●Weight: 142 g excluding cables, 400 g including cables