Products
3D Acoustic Camera
●Spatial 3D beamforming: the acoustic behaviour of a 3D object in a single measurement
●40 to 560 microphones depending on the application
●Array size from 400 mm up to 5000 mm, or integration into complete rooms (e.g. anechoic chamber)
●Beamforming from 50 Hz
●Real 3D Beamforming with Noise Inspector software
Overview
The 3D microphone array is used for spatial 3D beamforming. The object is placed inside the array for the 3D beamforming process. With only one measurement, the acoustic behaviour of the three-dimensional object can be displayed.
Depending on the application, 40 to 560 microphones can be used. The array size can also be chosen freely, up to the integration of the microphones into a whole room.

Technical Data
●Array size: from 400 mm up to 5000 mm, or complete rooms, e.g. anechoic chamber
●Sound pressure: <33 dB to 120 dB with up to 40 dB dynamic
●Microphones: 40 – 560 MEMS microphones, 24 bit resolution, sample rate 48 kHz, frequency range 10 Hz – 24 kHz
●Recommended frequency range: from 50 Hz with beamforming methods; below with decreased resolution
●Material: aluminium
Data Acquisition
The data acquisition system is a National Instruments embedded controller with real-time operating system and FPGA.
●Number of channels: 40
●Sample rate per channel: 48 kS/s
●Resolution: 24 bit
●Synchronous sampling: yes
●Interface to PC: Ethernet
●Fanless: yes
●Additional inputs: Trigger, Tacho (RPM)
●Power supply: 12 V, consumption < 7 W
●Dimensions: 23 cm x 18.5 cm x 5.8 cm, weight 2 kg
An optional Breakout Box extends the data acquisition system for connecting 8 to 40 channels of ICP/IEPE and analogue sensors.

Noise Inspector Software
The Noise Inspector software is the standard solution for visualizing sound sources. It guides you from data acquisition to analysis, saving and reporting of acoustic data.
●Online and offline analysis
●Acoustic photo and acoustic video
●Many HD algorithms: Beamforming, EVOB, CLEAN SC, MUSIC, Capon, DAMAS, Real 3D Beamforming and more
●Frequency analysis and time-frequency analysis (sonogram)
●Acoustic weighting (A, B, C) or linear presentation
●Open interface to Matlab for your own algorithms
●Easy export of third-octave/octave data, measurements, acoustic photos and acoustic videos
●Playback of local sound

Accessories
Calibrator adapter, battery, calibrator, flight case, windshields
Acoustic Results (3D Beamforming)

The 3D microphone array is used for spatial 3D beamforming. The object is placed inside the array for the 3D beamforming process. With only one measurement, the acoustic behaviour of the three-dimensional object can be displayed.
Depending on the application, 40 to 560 microphones can be used. The array size can also be chosen freely, up to the integration of the microphones into a whole room.

Technical Data
●Array size: from 400 mm up to 5000 mm, or complete rooms, e.g. anechoic chamber
●Sound pressure: <33 dB to 120 dB with up to 40 dB dynamic
●Microphones: 40 – 560 MEMS microphones, 24 bit resolution, sample rate 48 kHz, frequency range 10 Hz – 24 kHz
●Recommended frequency range: from 50 Hz with beamforming methods; below with decreased resolution
●Material: aluminium
Data Acquisition
The data acquisition system is a National Instruments embedded controller with real-time operating system and FPGA.
●Number of channels: 40
●Sample rate per channel: 48 kS/s
●Resolution: 24 bit
●Synchronous sampling: yes
●Interface to PC: Ethernet
●Fanless: yes
●Additional inputs: Trigger, Tacho (RPM)
●Power supply: 12 V, consumption < 7 W
●Dimensions: 23 cm x 18.5 cm x 5.8 cm, weight 2 kg
An optional Breakout Box extends the data acquisition system for connecting 8 to 40 channels of ICP/IEPE and analogue sensors.

Noise Inspector Software
The Noise Inspector software is the standard solution for visualizing sound sources. It guides you from data acquisition to analysis, saving and reporting of acoustic data.
●Online and offline analysis
●Acoustic photo and acoustic video
●Many HD algorithms: Beamforming, EVOB, CLEAN SC, MUSIC, Capon, DAMAS, Real 3D Beamforming and more
●Frequency analysis and time-frequency analysis (sonogram)
●Acoustic weighting (A, B, C) or linear presentation
●Open interface to Matlab for your own algorithms
●Easy export of third-octave/octave data, measurements, acoustic photos and acoustic videos
●Playback of local sound

Accessories
Calibrator adapter, battery, calibrator, flight case, windshields
Acoustic Results (3D Beamforming)
